Changes

Specifies title name of the data. Multiple lines are valid if you use with "{" and "}". Maximum length is 1k byte, including comments or others.

If you want to use double quotation in strings, repeat twice. If "Object too big" error occurs when exceed 80 characters in the title, usually it can be avoided with allocating track buffer (and reduce it lesser than automatic allocated bytes) with #alloc.

Allocates track buffers. Usually, track buffer is automatically allocated (16k/ all tracks(=16 or 18) bytes) when the track is used first time. If you use many tracks to write MML in, allocate bytes with this command.

;Allocates multiple track buffers at once

Specifies tone/noise mode for PSG. The range is 0-3 and 1 is used when it is omitted.

(2) Noise

;]

;@<tone_number>

Writes data<d> to register<r>, which actually uses envelope. It is ignored for SCC.

Adds <n> to current frequency. The range is -127 to 127. It rises frequency with positive number. Unit is the same as "¥" MML command.

Defines envelope data.

Up to about 10 is appropriate because if you set huge number to this parameter, sound ends in a moment (if you wish it on some purpose).

Speed of reducing volume from key off. RE is reduced from envelope volume which currently holded.

Defines tone data fir SCC. Data are hexadecimal(00-ff). Data should be 32 units and cannot be omitted.

;@v<number> = { data ... }

Defines original tone of FM.

; TL FB

25, 7,

;@#<number> = <n>

Changes assigned ROM tone number of the tone. MGSC assigns 1-15 of ROM tone to @0-14. Tones after @15 is assigned 0(original tone) and definition of tone is valid when <number> is more than 15. @# changes ROM tone number assigned to each tones. The range of <n> is 0-15 and 0 means original tone(refer about other numbers).

==Comments==

If ";"(semicolon) are found in the lunes(including MML), it is recognized as comment from the semicolon to the end of the line(CRLF) and ignored.

==MML==

MGSC stops compiling when detects even one error in the source.

Error reason is printed in Kanji character when Kanji driver resides and printed in alphabets in other case.

Line numbers are counted from 0 (and matches with KID.COM,AKID.COM editors' one). Note that there are not always exists the reason of errors in displayed line inside (especially in the case of macros and omission of close brace).

==Appendix==

'#tempo' should be used with for the first time. You should change tempo in the first track and if you change it again in the songs, synchronize timings with other tracks.

1 t86l4ct190def

2 l8ccddeeff

Example above does not occur tempo gaps but example below occur it, because changing tempo while playing musics on the tracks 2 and 3.

3 l4gggg

Tempo are not independent on every tracks. Track 2 and 3 does not have tempo settings but that on the track 1 (to be exact, at the note next to changing tempo) effects other tracks in 2 examples above. Tempo setting on such manner only consumes track buffers.

2 t86efgt90efgt100efga

3 t86ccct90ccct100cccc

-e option limits to only CP/M functions. MGSC works on CP/M emulators etc. if Z80 commands are supported. Playing musics are not supported (-p option and others are not valid).

==History==