1,345
edits
Changes
→The installation
==To start==
===2.1.Hardware===
To work with this program, at least the following hardware is required:
:-MSX2 Computer with 128 kB RAM and 128 kB VRAM
:-A single-sided FDD disk drive
In order to obtain the stereo sound as intended with this program, both sound chips and a stereo amplifier are required. It is preferable to connect the sound of the MSX-MUSIC chip to the left input and the sound of the MSX-AUDIO to the right input of the amplifier. For an accurate description of this, we recommend you to refer you to appendix C.
===2.2.The program===
If the configuration of your system meets the above requirements, you are ready to save the program. Please note that the following items were in the box when they were purchased:
:-This instruction
:-1 floppy disk with samples, voices and voicebanks
===2.3.Starting the program===
To start the program, place the program disk in drive A :. Reset the computer or switch it on. If there is a music module, keep the [ESC] key pressed down (Note: For some music modules, the ROM with the internal program has been deleted or changed, so there is no need to start with [ESC].) The computer will then display MoonBlaster loading and is ready to use.
===2.4.The installation===
If you have turned on or reset the computer, you can press and hold the [I] key during the boot. This activates the install menu. After starting the install menu, a screen will be displayed with the top menu at the top. This main menu contains three choices that can be selected with the cursor up / down and the space bar.