TRACKERS MOONBLASTER EN A3

Appendix C

Technical data MSX-MUSIC, MSX-AUDIO and STEREO

MSX-MUSIC:	Yamaha YM2413
Possibilities:	6 channel music and 1 rhythm channel or 9 channel music without rhythm Limited preset options (max.1 software voice) 1 sound synthesis (FM)
Used in:	MSX 2+, MSX Turbo R Panasonic FM-PAC FM-Ship FM-Stereo-PAK MK FM-PAC

MSX AUDIO:	Yamaha Y8950
ADPCM sampler
Used in:	Panasonic MSX-AUDIO Philips Music Module Toshiba MSX-AUDIO

STEREO:	MSX-MUSIC and MSX-AUDIO
Required:	amplifier

Connection

Some MSX-MUSLCs and computers and all MSX-AUDIOs have a tulip output so that the sound can be easily connected to an amplifier. This therefore gives (almost) no problems. The rest of the MSX-MUSICs send their signal only to the computer and can best be captured via the monitor connector. Information about this can be found everywhere, but we refer you to the MSX-Club Belgie / Nederland Magazine no. 38 of November 1991, pages 76 and 77 for detailed information about all monitor connectors.

Note: if, for example, the MSX-AUDIO signal is transmitted via the tulip to an amplifier and the MSX-MUSIC via the computer, the signal from some MSX-AUDIOs (eg the music module) will also be transmitted. So you hear two signals, that of the MSX-MUSIC and the MSX-AUDIO. One solution is to tap pin 49 of the MSX-AUDIO cartridge with an adhesive tape, so that the MSX-AUDIO sound signal is no longer transmitted to the computer. Look for the location of pin 49 in the manual of your computer. (Note: Sunrise Foundation is not liable for any damage to your MSX-AUDIO or Music Module due to improper performance of these instructions.)

We advise you to place the MSX-MUSIC signal on the left and the MSX-AUDIO signal on the right, but this is of course for the user to determine.